« Any Views On Black & Decker 18v Cordless Hammer Drill Hp188f3b Orange?
Is The Black And Decker Vpx Drill/driver Any Good? »
Dec 18 2009

How Can I Unjam A Philips Head Bit That Is Jammed In A Black And Decker Drill?

Posted by: akka in Black & Decker Drill FAQ, tags: , , , , , , ,

I use needle nose ‘vise grips’ and grip it on the ‘head’of the driver bit, (it’s easier with an extra hand) have your helper hold the drill while you tap on the vise grips, it’ll come right out.

Technorati Tags: , , , , , , ,

This entry was posted on Friday, December 18th, 2009 at 1:49 pm and is filed under Black & Decker Drill FAQ.You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.

3 Responses to “How Can I Unjam A Philips Head Bit That Is Jammed In A Black And Decker Drill?”
  1. Rambo says: December 18th, 2009 at 5:30 pm

    With the chuck open tap the bit lightly all around to try to free it. If that doesn’t work put the bit in a vise with the chuck open and tap the end of the chuck with a hammer and a piece of round brass or aluminum so as not to damage the jaws.

  2. george b says: December 18th, 2009 at 6:02 pm

    put the drill in reverse, hold onto the chuck tightly (the large round part around the things that hold onto the bit) & turn it on slowly

  3. cheezy says: December 18th, 2009 at 7:40 pm

    Try to tap lightly with a hammer.